RS232/RS422/RS485 interface module

RS232/RS422/RS485 interface module

368.00DKK
RS232/RS422/RS485 interface module
with selectable interface

Description

Product properties:

  • Tiny plug-in interfaces
  • Complete selection of interfaces
    • RS232
    • RS485/RS422
    • RS232/RS422/RS485 (selectable interface type)
    • Profibus
    • 20mA

 

Background information:
Due to their modular design, all W&T Com-Servers and most W&T PC cards can be equipped with various port types. In contrast to standard devices that are equipped only with RS232 ports, the interfaces of W&T equipment can be modified by simply replacing the existing interface modules with the desired ones.

Features

Data

TTL plug adapter:   2-mm adapter
Dimensions:    45x32x14 mm
Weight:   approx. 15 g
     
    RS232/RS422/RS485 combination module, #18813
Operating modes:    RS232
RS422
RS485 2/4 wire with handshake control
RS485 2/4 wire with automatic control
Switching time:   approx. 10µs for switching from data send to receive
for RS485 automatic control (can be changed on request)
Transfer rate:   RS232: max. 230 kbaud
RS422/RS485: max. 10 Mbaud
Signals:   RS232: RxD,TxD,RTS,CTS,DSR,DCD,DTR,RI
RS422: RxD,TxD,CTS,DTR
RS485: RxD, TxD
Termination:   Connectable termination network
Power supply:   5 V @20mA
Output:   9-pin SUB-D adapter
     
    RS232 DTE module, #18811
Transfer rate:   max. 115,200 baud
Signals:   RxD,TxD,RTS,CTS,DSR,DCD,DTR,RI
Power supply:   5 V @20mA
Input:   2-mm adapter
Output:   9-pin SUB-D plug
     
    RS422/485 module, #18611
Operating modes:    RS422
RS485 2/4 wire with handshake control
RS485 2/4 wire with automatic control
Switching time:   approx. 10µs for switching from data send to receive
for RS485 automatic control (can be changed on request)
Transfer rate:   max. 10 Mbaud
Signals:   RxD,TxD,CTS,DTR
Termination:   Connectable termination network
Power supply:   5 V @20mA
Output:   9-pin SUB-D adapter
     
    Profibus module, #18612
Operating mode:   RS485 2-wire mode with echo suppression and
automatic control of the RS485 transceivers
Switching time:   approx. 1µs for switching from data send to receive
(can be changed on request)
Transfer rate:   max. 10 Mbaud
Signal lines:   Bus A/B
Vcc and GND for supply of the
external termination network
Power supply:   5 V @40mA
Output:   9-pin SUB-D socket
     
    20mA module, #18411
Transfer rate:   max. 19.200 kBaud
Signals:   RxD,TxD
Operating modes:   active/passive mode
Power supply:   5 V @10mA / 12V @40mA
Output:   9-pin SUB-D plug
     
    20mA module, #18412
Transfer rate:   max. 19.200 kBaud
Signals:   RxD,TxD
Operating modes:   active/passive mode
Power supply:   3.3...5 volts, max. 210mA at 3.3 V
Integrated step-up converter
for active mode
Output:   9-pin SUB-D plug

Manual

 

FAQs

Send messages - when limits are violated or timer-based - for informational purposes directly to the responsible technical as an e-mail or as a reroute via SMS.

e-5wwww-29-grde-000

After the device has been configured for and connected to your network, the following steps are still necessary.

e-57606-28-piww-000
Open the profile for configuring e-mail alarm messages. e-57606-35-pide-000
Enter the desired parameters. e-57606-36-pide-000
When the limit you have set is exceeded, the device sends an e-mail which can also be transmitted as an SMS message using special functions available from cellular phone service providers. e-57606-37-piww-000