pure.box 2 seriell - USB

pure.box 3 seriell - USB

2,085.00DKK
pure.box 3 - Linux on the DIN rail... not as a large construction site, but turnkey ready for your application.

Description

Linux on the DIN rail... not as a large construction site, but turnkey ready for your application

Use the pure.box 3 with serial and USB interfaces as the framework for your application. The pre-configured Linux system comes ready with everything you need for network- and web-based applications. The supported database systems MySQL and SQLite enable convenient saving of your application data. Use the serial port to connect terminal devices which you control and monitor through your application. Use the USB port to connect HID devices, USB serial converter and WLAN adapters. Do you have another type of device you need to connect to the pure.box? This email address is being protected from spambots. You need JavaScript enabled to view it.

On request we will also develop the application software to your particular needs and requirements

This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

 

 

Product properties:

  • NEW! Buffer capacitors for controlled shutdown when disconnecting from the power supply
  • Use Web-Servers for your own applications and upload Web and PHP pages into the pure.box
  • MySQL database incl. server interface or SQLite usable for your own application data
  • Run your own C/C++ programs and PHP scripts (Java on This email address is being protected from spambots. You need JavaScript enabled to view it.) time- and event controlled
  • 750MB for your own files
  • Thanks to web-based management complete configuration using your browser
  • Support for HTTPS encryption and your own certificates
  • Combination of multi-color LED and buttons for system status and device reset
  • Energy consumption <2.0W (without USB consumer)
  • Conforms to standards both in office and industrial environments:
    • Increased noise immunity for industrial areas
    • Stricter noise emission for residential and commercial areas
  • 5 year guarantee

 

Data

 

Technical data:

Network      
  • 10/100BaseT
  • autosensing
  • autocrossing
Connections  
  • 1 x network (RJ45)
  • 1x serial combi-interface with RS232/422/485
    50 ... 230,400 baud
  • 1 x USB 2.0
  • Screw terminals for supply voltage (alternative to PoE)
LEDs / Buttons  
  • System status using multi-color LED
  • Current network speed and data transfer
  • Manual device reset
Supply Voltage  
  • Power-over-Ethernet (PoE)
  • 24 ... 48V DC (+ / -10%) using screw terminals
Current draw without
connected USB device
 
  • 60mA @ 24V
  • 40mA @ 48V
Temperatures / Relative humidity  
  • Row mounting: 0 ... 65°C
  • Non-row mounting: 0 ... 70°C
  • 0 ... 90% RH, non-condensing
Housing / Weight  
  • Plastic compact housing (105 x 75 x 45mm)
  • Integrated DIN rail mount
  • approx. 140g
Processor / Memory  
  • Marvell 88F6180
  • NAND Flash: 1 GB
  • DDR2: 128MB
Operating system  
  • BusyBox: v1.21.2
  • GNU/Linux, Kernel: v3.2.48
Installed software  
  • FTP server: vsftpd v3.0.2
  • Web server: lighttpd v1.4.32
  • SMB server: Samba v3.6.16
  • PHP interpreter: v5.4.17
  • MySQL: v5.5.32
  • SQLite: v3.7.17
Scope of delivery  
  • pure.box 3 Serial / USB
  • Quick start manual
  • W&T Product CD

Manual

Firmware

FAQ

Send messages - when limits are violated or timer-based - for informational purposes directly to the responsible technical as an e-mail or as a reroute via SMS.

e-5wwww-29-grde-000

After the device has been configured for and connected to your network, the following steps are still necessary.

e-57606-28-piww-000
Open the profile for configuring e-mail alarm messages. e-57606-35-pide-000
Enter the desired parameters. e-57606-36-pide-000
When the limit you have set is exceeded, the device sends an e-mail which can also be transmitted as an SMS message using special functions available from cellular phone service providers. e-57606-37-piww-000

Tools